Arteris Press Releases

Arteris IP FlexNoC Interconnect Licensed by Nationz Technologies for Ultra-Low Power Security IoT Chips

Digital authentication and security leader brings capabilities to IoT by using state-of-the-art on-chip interconnect IP

CAMPBELL, Calif. — January 9, 2018 — Arteris IP, the innovative supplier of silicon-proven commercial system-on-chip (SoC) interconnect IP, today announced that Chinese secure IoT device leader Nationz Technologies has licensed Arteris IP FlexNoC interconnect IP for use in ultra-low power IoT chips that enable trusted services. Nationz has been a leader in trusted platform module (TPM) and digital authentication systems for online banking and mobile services, and is broadly enabling these capabilities for the Internet of Things (IoT).

The FlexNoC interconnect’s security and firewall technologies allow us to address sophisticated security use cases that would otherwise not be easily implementable.


Jay Liang, Vice President, Nationz Technologies

Topics: nationz technologies china SoC security IoT low power new customer flexnoc interconnect

Blu Wireless Licenses Arteris FlexNoC Interconnect IP for HYDRA WiGig and 4G Backhaul Subsystems

Fully-featured network-on-chip (NoC) IP shortens design time, increases performance and reduces die cost and power consumption 

CAMPBELL, Calif. — November 3, 2015 —Arteris Inc., the inventor and only supplier of silicon-proven commercial network-on-chip (NoC) interconnect IP solutions, today announced that Blu Wireless Technology has licensed Arteris FlexNoC interconnect IP for use in its HYDRA WiGig and 60GHz millimeter wave baseband IP.

Blu Wireless, based in Bristol, UK, designs and licenses semiconductor intellectual property to telecommunications semiconductor companies for gigabit rate wireless modems operating in the millimeter wave frequency bands.

Because we use a complex heterogeneous multiprocessing architecture, mixing fixed-function DSP blocks with highly optimized parallel vector DSPs, we required an interconnect that implements end-to-end quality of service guaranteeing our on-chip latency and bandwidth requirements. Arteris FlexNoC delivered this QoS while using less die area and power consumption than competing technologies.


Henry Nurser, CEO, Blu Wireless

Topics: IoT new customer wireless mobility

Sequans Licenses Arteris FlexNoC Interconnect IP for Low Power LTE IoT SoC

New version improves SoC designer productivity, provides foundation for future technologies

CAMPBELL, California — July 7, 2015 — Arteris Inc., the inventor and only supplier of silicon-proven commercial network-on-chip (NoC) interconnect IP solutions, today announced that Sequans Communications, maker of single-mode LTE chipsets for the Internet of Things, has licensed Arteris FlexNoC IP for use in its next generation of IoT chipsets.

Arteris FlexNoC’s development efficiency benefits give us an advantage over our competitors because we can get our product to market sooner with more features and at a higher quality level.


Bertrand Debray, COO and founder, Sequans Communications

Topics: IoT new customer europe low power Sequans Communications LTE

Arteris FlexNoC Helps Enable Texas Instruments Wireless Connectivity for the Internet of Things (IoT)

Network-on-chip interconnect enables complete family of industry’s lowest power RF devices for Zigbee® RF4CE™, Bluetooth® low energy and other IoT standards

CAMPBELL, California — February 25, 2015 — Arteris Inc., the inventor and only supplier of silicon-proven commercial network-on-chip (NoC) interconnect IP solutions, today announced that Texas Instruments (TI) has implemented Arteris® FlexNoC® fabric IP in its SimpleLink™ ultra-low power wireless MCU portfolio. The TI SimpleLink family is part of the industry’s broadest wireless connectivity portfolio of cost-effective, low-power solutions for communications in the Internet of Things (IoT).

FlexNoC’s power management features and low latency helped us create the lowest-power IoT communication devices in the world. Just as important were the business benefits: Using FlexNoC allowed us to create a small set of digital logic SoC dies that serve as the brains of more than one hundred different products, each customized for its particular market.

FlexNoC’s flexibility and automation, combined with our implementation of software-programmable on-chip firewalls and power disconnect features, enabled us to produce an entire product line with a minimal number of digital logic components.


Oyvind Birkenes, General Manager, Wireless Connectivity SolutionsTexas Instruments

Topics: IoT new customer Texas Instruments wireless mobility